http://setup.ampedwireless.com is the web address that allows you to connect and configure to the Amped wireless network. You can log in into the Amped wireless using http://setup.ampedwireless.com.

You can also use the default IP address that is http://192.168.3.1 to access the router configuration.

How I can connect the extender with Amped wireless router manually?

Amped wireless router manuallyThe amped wireless range extender is used to expand the current wireless network range. It takes the signal from the key router and starts broadcasting it the areas where you hardly get the Wi-Fi signal.

You can follow the below mentioned instructions to set up the extender with the Amped wireless router manually:

  • First of all, unbox your Amped extender and plug-in into the power source.
  • Now, push the WPS button on the extender and on the Amped router within 2 minutes.
  • The WPS LEDs of both the Amped router and extender will turn solid green when the WPS connection gets established between the extender and the router.
  • Now, unplug your Amped extender and plug it into a power source nearby or the halfway distance of your connecting device and router.
  • Once you have plugged it in, wait for the power light to turn solid green as it will give the surety of well-established connection.
  • Once you got the perfect location for your extender, connect your devices with new network name.
  • To connect, type the same password that you are using for the router.
  • Once you have successfully connected, check the light on the extender.
  • If the light is amber, it means you have a solid connection.
  • Your AC Wi-Fi extender is set up and ready to use.

How I can set up and login into my Amped wireless router?

set up and login into my Amped wireless routerIt is a very easy process to set up and log into the Amped wireless. You can follow the below mentioned instructions to set up and log in into your Amped wireless:

Power off and disconnect your existing router

  • Disconnect your existing router from your computer, broadband modem and its power outlet. If you don’t have an existing router then you can continue to step 2:

Power off your modem

  • Turn off the modem by disconnecting the modem’s power adapter from the power outlet.
  • If your modem has battery backup, remove battery backup from your modem.
    Note: Do not power on your modem until step 4.

Connect the router to your modem

  • Box comes with blue Ethernet cable; connect one end of the cable to the modem
  • Connect the other end of the cable to the router.

Power off your modem

  • Once you are done with the third step, plug in the power adapter and battery backup into the modem and then switch it on.
  • Allow for a minute or two start the modem.

Turn on the router and connect it your computer

  • Once you are done with the fourth step, you need to connect the antenna.
  • Connect the grey Ethernet cable to an available network port.
  • Attach the power adapter to the power router.

Now, login into http://setup.ampedwireless.com

  • Open a web browser that is connected to your router’s network.
  • Type http://setup.ampedwireless.com in the web address.
  • Enter the login and password credentials.
  • The default login and password credentials are admin.

Note: If you are not able to access the web page using http://setup.ampedwireless.com then you can try accessing the web page using http://192.168.3.1.

If you have a problem accessing the web interface then disable the third party firewall you’re your computer have on.

Set up the router using smart wizard set up using http://setup.ampedwireless.com

  • The smart wizard set up will automatically start the process and will guide you throughout the entire process.

Configure your internet settings and wireless settings using http://setup.ampedwireless.com

  • You can set up internet settings using automatic settings.
  • You can also set up your connection using manual configuration.
  • If the automatic configuration is successful then you will be directed to configuration successful page.
  • Click next.

Setting the system clock

  • The system clock is used for system log for internet access.
  • Click sync to put in sync the system clock with the time on your computer.
  • Click next.

Set up your wireless setting: http://setup.ampedwireless.com

  • The default ID of your wireless network is Amped_Network.
  • Enter a new name in the SSID field.
  • A user will identify this ID to identify your wireless network.
  • Click next.

Wireless security settings: http://setup.ampedwireless.com

  • The default security key of your wireless network is
  • If you want to change the security key, enter a new key in the security field.
  • Click next to apply settings.
  • The router will take 1-2 minutes to reboot.
  • The page will automatically reload.
  • If it does not reload, refresh this page.
  • Check your connection to the router.

Setup summary page

This page will show that your router is successfully configured.

How I can update the password of my Amped wireless?

password of my Amped wirelessYou can change the password of your Amped wireless; it is highly suggested to change the password of Amped wireless so that no one can access your router’s information. Using www.setup.ampedwireless.com:

You can follow the below mentioned instructions to change the password of your Amped wireless:

  • Open an internet browser from a device or computer that is connected to the router’s network.
  • Type setup.ampedwireless.com in the address bar.
  • Hit enter.
  • You will be directed to the login screen.
  • Enter the default credentials in the respective fields.
  • The default username and password is admin.
  • Click on log in or ok.
  • It will direct you to the smart wizard set up.
  • On the Basic Home page, go to Basic Wi-Fi settings.
  • Go to the wireless network field.
  • You will be the change the username of the router here.
  • Go to the wireless security tab.
  • The user can change the router password here.
  • Once you have changed the settings, click next to save the settings.
  • You can connect to your router using the new settings.

How I can upgrade the firmware of Amped wireless using
www.setup.ampedwireless.com
?

upgrade the firmware of Amped wirelessIt is important to upgrade the firmware of the Amped wireless as it will help in bug fixing and improve the performance of the firmware. Using www.setup.ampedwireless.com:

You can follow the below mentioned instructions to upgrade the firmware of Amped wireless:

  • Open a web browser from a computer that is connected to the router’s network.
  • Type setup.ampedwireless.com in the address bar.
  • Press enter.
  • It will open up a login authentication screen.
  • Enter the default credentials.
  • Click on login.
  • Once you have successfully logged in, you will get the Basic home page screen.
  • Click on the administration tab.
  • Click on the router firmware tab.
  • Click on update tab and proceed.
  • Click on the check button on the in the left pane of the screen.
  • Click on the button and you will be directed to the download link for the firmware update.
  • Click on the download link that is shown.
  • Save the updated file in a particular location on your PC.
  • The router will ask you to choose the location of the file.
  • Click browse and file that you have recently saved.
  • Tap on the upload button.
  • Now, the uploading process will start in a couple of seconds.
  • The router will reboot once the process is complete.
  • The uploading process will start within a few seconds.

How I can update the router’s password?

Amped wireless router comes with default username and password but you can change the password of the router using www.setup.ampedwireless.com web-interface.

Let’s see how we can update the router admin password using www.setup.ampedwireless.com:

  • Open a web browser that is connected to the router’s network.
  • Enter setup.ampedwireless.com in the address bar.
  • Hit enter.
  • It will open up the login authentication screen.
  • Enter the default credentials.
  • Click on login or ok button.
  • It will direct you to the Basic Dashboard screen.
  • Click on the Maintenance menu.
  • Select the set password.
  • Type your old password.
  • Enter the new password that you want to keep for your router.
  • Click on the apply button and save changes.

What should I do if I am not able to access http://setup.ampedwireless.com?

  • Check and make sure that the computer is connected to Range extender’s Wi-Fi network: Amped_SR. (If you are using a range extender).
  • Try using a different web browser, Google Chrome web browser is highly recommended.
  • Open your web browser and try to access the router interface using a default IP address that is 192.168.1.240.
  • Power off the router and again power it on if the problem is not resolved and try to log in again.
  • Reset your range extender and router by holding the reset button for 5-10 seconds.
  • If all the above given workarounds don’t work out, attach an Ethernet cable between range extender and your PC and try to access http://setup.ampedwireless.com

What should I do if I am not able to get to set up wizard of the Amped router?

  • Check whether your PC is even connected to network or not.
  • You need to check whether you have followed the former steps properly or not.
  • The poor connection can also lead to this problem.
  • Make sure that you are typing the correct link.
    Note: You can access the web-management interface using http://setup.ampedwireless.com.

How I can reset my Amped extender?

Amped Extender should be frequently reset in order to refresh it from the cached data and disorganized information. Resetting the device will bring the device to its default configuration.

You can follow the below mentioned instructions to reset your Amped extender:

  • Locate the reset button behind the router.
  • Now you need to press and hold the reset button for 10 seconds.
  • Everything will revert back to its default settings.

How I can access the configuration settings of the Amped router?

You can type http://setup.ampedwireless.com on the URL of the browser. You can access all the settings and advanced configuration of the Amped router using http://setup.ampedwireless.com.

How I can prevent the Wi-Fi signal from disappearing?

You can try the following troubleshoots if your Wi-Fi signal is disappearing and making your signal weak.

  1. Check if the firmware is upgraded or not.
  2. Locate the router and extender on the right place.
  3. You can create a guest network for the visitors which will prevent them to access your main network.
  4. Choose an efficient device which will prevent any bugs from your network.
  5. Keep your extender updated and keep the password safe from unknown access.

What could be the possible reason if your router is using more data than usual?

  1. Check the number of devices that are connected to the network. If there are more devices than your router can handle then remove some device to gain the network again.
  2. Check the guest network if there is an unknown device or user, block them.
  3. Update the firmware of the router and extender

What should I do if I forgot my Amped wireless router password?

It is a very common issue and you can resolve this issue by resetting the router. Resetting the router will revert all the settings and then you can log in into your router using the default credentials. The reset can be done either through the web user interface or simply by pushing the reset button given inside a pinhole of the router.

In which situations you need to change the channel of the Wi-Fi router?

If you are facing poor connection, especially with the heavy network then you can try fixing this issue by changing the frequency channel and band by accessing the interface through setup.ampedwireless.com.

How I can change the channel of my Wi-Fi router?

  • Open the web-interface using http://setup.ampedwireless.com.
  • Once you get access to the Dashboard screen after logging in.
  • Go to the settings and change the channel to the desired value.
  • Save the settings.

What is the default IP address and login page of the Amped wireless router?

What is the default username and password of the Amped wireless router?

  • The default username is admin.
  • The default password is password.

Leave a Reply

Your email address will not be published. Required fields are marked *